text.skipToContent
text.skipToNavigation
![175733]()
Finger Joint Cutters 15/15
ID
187436
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | ZL | NF | nMax | Cut_Mat | Mat.-No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | 187432 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | 187433 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HW | 187435 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | TC104 | 187436 |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | 187487 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | TC104 | 187488 |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HW | 187490 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | 187491 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | TC104 | 187494 |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | TC104 | 187706 |
| DA | SB1 | IML | IMD | Z | ZL | NF | nMax | Cut_Mat | Mat.-No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | 187432 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | 187433 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HW | 187435 | |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | TC104 | 187436 |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | 187487 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | TC104 | 187488 |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HW | 187490 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | 187491 | |
| 260 | 28.6 | 26.6 | 50 | 3+3 | 3.8 | 15/15 | 0007 | 006000 | HS | TC104 | 187494 |
| 170 | 28.6 | 26.6 | 50 | 2+2 | 3.8 | 15/15 | 0007 | 008000 | HS | TC104 | 187706 |
Image Legend
-
-
Finger joint length -
Cutting width 1 -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point -
Number of finger joints
Product Details
Maschine
finger joint machines
machines without cross-cutting device
Application
For longitudinal joints in soft, hard and exotic woods, with a finger length of 15 mm
Design
Finger length of 15 mm
HS suitable for soft woods
HS Solid 34 suitable for knotty soft woods
HW suitable for hard and exotic woods
Advantages
HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters
Diameter 1
170
Diameter - Outermost cutting point
170
Cutting width 1
28.6
Bore / shank diameter
50
Number of teeth
2+2
Finger joint length
15/15
Number of finger joints
0007
RPM max
008000
Cutting material group
High speed steel (HSS)