text.skipToContent
text.skipToNavigation
![80293990]()
Pre-Cut Gang-Rip Saw Blades HW with HW-rakers 'F' - Möhringer
ID
80293989
Product variants
Product variants
| DA | SB1 | b | ND | IML | IMD | Z | ZF1 | NL | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 595 | 5.2 | 3.6 | 190 | 6.8 | 105 | 20 | 006 | 8/13/156 | LH | 80293989 |
| 595 | 5.2 | 3.6 | 190 | 6.8 | 105 | 20 | 006 | 8/13/156 | RH | 80293990 |
Image Legend
-
Cutting direction -
Cutting width 1 -
Pin holes -
Number of teeth flange/raker/front -
Body thickness reduced -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
primary machines with and without chippers
Application
for longitudinal cuts in wet and dry soft woods
Design
tooth configuration: flat "F"
cutting material: HW HL Board 20
type A and C with staggered double keyways
cutting material: HW HL Board 20
type A and C with staggered double keyways
Advantages
extremely high bending strength and hardness of the teeth
tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Diameter - Outermost cutting point
595
Cutting width 1
5.2
Body thickness reduced
3.6
Hub diameter
190
Clamping length
6.8
Bore / shank diameter
105
Number of teeth
20
Number of teeth flange/raker/front
006
Tooth configuration
Flat tooth
Pin holes
8/13/156
RPM max
003300
Cutting direction
left-handed
Cutting material group
Hardmetal
Cutting material specification
HL Board20
Machine group
sawing machines
Machine type
Primary machines
Machine / Aggregate
Möhringer
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO topline
Scope of application
Machining of solid wood
Application
saw mills / planing mills
Processing step
pre-cut
Workpiece material
Solidwoodandsolidwoodproducts
Workpiece type
Soft wood
Workpiece material
Longitudinal cut dry