text.skipToContent
text.skipToNavigation
![185663]()
p-System High-Performance Shank-Type Cutters CM DP - Weeke BHX 050/055
ID
185663
Product variants
Product variants
| DA | SB1 | IML | IMD | Lmax | Z | AShear | DR1 | RZ | Material number |
|---|---|---|---|---|---|---|---|---|---|
| 25 | 25.7 | 53 | 25 | 105 | 2+2+1 | 70 | RH | 2.5 | 185663 |
| 20 | 25.1 | 51 | 25 | 105 | 1+1 | 70 | RH | 2.5 | 185664 |
| 25 | 30 | 53 | 25 | 110 | 2+2+1 | 70 | RH | 2.5 | 185823 |
| 25 | 47.2 | 53 | 25 | 125 | 2+2+1 | 70 | RH | 2.5 | 185824 |
Image Legend
-
Cutting direction -
Cutting width 1 -
Resharpening zone -
Shear angle -
Total length -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
WEEKE BHX 050 and BHX 055 with delivery date as from Sept. 01, 2015
BHX 50/055 machines with CNC controlled clamping devices (servo) and with delivery date as from 01.01.2014 only can be updated by the manufacturer (Note: Service charges will occur)
BHX 50/055 machines with CNC controlled clamping devices (servo) and with delivery date as from 01.01.2014 only can be updated by the manufacturer (Note: Service charges will occur)
Application
for chip-free high-performance jointing and dividing of solid woods (free of knots) along and accross the grain
for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
for jointing and dividing of melamine-, paper-, HPL-laminated, foiled and veneered panels and lacquered surfaces
Finish-quality in the case of fiber materials such as fabric-laminated panels, linoleum with jute fibers, cork etc.
Design
extremely scoring cut
asymmetrical design
DP plunge tip
asymmetrical design
DP plunge tip
Advantages
maximum cutting quality and edge lives
chip-free cuts even on the exit side
increased contact pressure than conventional shank-type cutters
chip-free cuts even on the exit side
increased contact pressure than conventional shank-type cutters
Notes
Tools with plunge tip (L4) must project at least 4,5 mm on bottom side of workpiece in order to bring p-System cutting edges into action. D 30 is without plunge tip
for ramping or circular plungeing only
recommended feed rate per tooth: wood-based panels 0.3 - 0.35 mm, solid wood 0.15 - 0.2 mm
clamping element: precision clamping element e.g. ps-System, TRIBOS
with thread for length adjusting screw
sense of rotation according to VDMA 8849
Diameter - Outermost cutting point
25
Axial working depth 1
30.2
Diameter max
25
Cutting width 1
25.7
Clamping length
53
Interface towards the machine
Shank
Bore / shank diameter
25
Total length
105
Number of teeth
2+2+1
RPM min
000000
RPM max
024000
Cutting direction
right-handed
Cutting material group
Diamond, polycrystalline
Resharpening zone
2.5
Machine group
Milling centers
Machine type
CNC stationary manufacturing
Machine / Aggregate
Weeke BHX 050
Weeke BHX 055
Weeke BHX 055
Brand name LEUCO
LEUCO p-System
Quality level LEUCO
LEUCO topline
Scope of application
CNC machining
Application
Furniture manufacturing
Processing step
Planing/Profiling furniture
Workpiece material
Wood-based panels
Mineral workpiece materials
Solidwoodandsolidwoodproducts
Mineral workpiece materials
Solidwoodandsolidwoodproducts
Workpiece type
Cork
HDF
MDF
Gypsum bound
Hard wood
Soft wood
Glued laminated timber
Solid wood and veneered mat
Particle boards
Laminated particle board
HDF
MDF
Gypsum bound
Hard wood
Soft wood
Glued laminated timber
Solid wood and veneered mat
Particle boards
Laminated particle board
Workpiece material
Plywood
Multiplex
Wood core plywood
OSB particle board flooring
Cross cut try hardwood
Particle board-melamcoverlay
Cork
Gypsum fiber board withveneer
KVH
Gypsum fiber board with MDF
MDF (lacquered)
BSH
Longitudinal cut dry
Glued laminated timber board
Veneered timber
HDF (panel material)
Spanplatte (HPL beschichtet)
Gypsum plaster board
Cross cut dry
Particle board (veneered)
Longitudinal cut dry hardwood
Particle board (raw)
Particle board (CPL-coated)
Multiplex
Wood core plywood
OSB particle board flooring
Cross cut try hardwood
Particle board-melamcoverlay
Cork
Gypsum fiber board withveneer
KVH
Gypsum fiber board with MDF
MDF (lacquered)
BSH
Longitudinal cut dry
Glued laminated timber board
Veneered timber
HDF (panel material)
Spanplatte (HPL beschichtet)
Gypsum plaster board
Cross cut dry
Particle board (veneered)
Longitudinal cut dry hardwood
Particle board (raw)
Particle board (CPL-coated)