text.skipToContent text.skipToNavigation
Gang-Rip Saw Blades HW 'F' ID 188027
419-ECOM
LOG_FIR_LEUCO-DUR-Katalog-w_#SALL_#AIN_#V1.png LOG_FIR_LEUCO-Topline-Katalog-w_#SALL_#AIN_#V1.png

Image Legend

  • GRA_MKM_FBJ_FBJ-B31_#SALL_#AIN_#V1.png
    Cutting width 1
  • GRA_MKM_ZBJ_ZBJ-N1_#SALL_#AIN_#V1.png
    Pin holes
  • GRA_MKM_KSN_KSN-K1_#SALL_#AIN_#V1.png
    Interface towards the machine specification
  • GRA_MKM_ALG_IMD-ITD_#SALL_#AIN_#V1.png
    Bore / shank diameter
  • GRA_MKM_ALG_IML_#SALL_#AIN_#V1.png
    Clamping length
  • GRA_MKM_FBJ_FBJ-Z2_#SALL_#AIN_#V1.png
    Number of teeth
  • GRA_MKM_ALG_DA_#SALL_#AIN_#V1.png
    Diameter - Outermost cutting point

Product Details

Maschine
molders
gang-rip saws with one or two shafts
Application
for precise ripping cuts in dry and planed soft woods
Design
tooth configuration: flat "F"
cutting material: HW HL Board 20
type A and C with staggered double keyways
Advantages
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes

larger bore (max. Ø 100 mm) available for a surcharge
for cutting height >50 mm use version with HW rakers
for inquiries / orders enclose specification sheet (see appendix)

Diameter - Outermost cutting point
350
Cutting width 1
3.5
Clamping length
2.5
Bore / shank diameter
80
Bore diameter max
100
Interface towards the machine specification
18,5x5
Number of teeth
28
Tooth configuration
Flat tooth
Pin holes
6/5,5/91 + 4/6,6/95 + 2/13/100
RPM max
005500
Cutting direction
universal
Cutting material group
Hardmetal
Cutting material specification
HL Board20
Machine group
sawing machines
Machine type
Gang-rip saws
Machine / Aggregate
Raimann
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO topline
Scope of application
Machining of solid wood
Application
saw mills / planing mills
Processing step
finish cut saw/planung mill
Workpiece material
Solidwoodandsolidwoodproducts
Workpiece type
Soft wood
Workpiece material
Longitudinal cut wet softwood
Longitudinal cut dry

Downloads