| DRP1 | IML | IMD | Lmax | DR1 | Mat.-No. |
|---|---|---|---|---|---|
| 3 | 50 | 3 | 250 | RH | 80484170 |
| 4 | 50 | 4 | 250 | RH | 80484171 |
| 5 | 50 | 5 | 250 | RH | 80484172 |
| 6 | 50 | 6 | 250 | RH | 80484173 |
| 7 | 50 | 7 | 250 | RH | 80484174 |
| 8 | 50 | 8 | 250 | RH | 80484175 |
| 9 | 50 | 9 | 250 | RH | 80484176 |
| 10 | 50 | 10 | 250 | RH | 80484177 |
| 11 | 50 | 11 | 250 | RH | 80484178 |
| 12 | 50 | 12 | 250 | RH | 80484179 |
| 13 | 50 | 13 | 250 | RH | 80484180 |
| 14 | 50 | 13 | 250 | RH | 80484181 |
| 15 | 50 | 13 | 250 | RH | 80484182 |
| 16 | 50 | 13 | 250 | RH | 80484183 |
| 18 | 50 | 13 | 250 | RH | 80484184 |
| 20 | 50 | 13 | 250 | RH | 80484185 |
| 22 | 50 | 13 | 250 | RH | 80484186 |
| 24 | 50 | 13 | 250 | RH | 80484187 |
| 25 | 50 | 13 | 250 | RH | 80484188 |
| 3 | 65 | 3 | 315 | RH | 80484189 |
| 4 | 65 | 4 | 315 | RH | 80484190 |
| 5 | 65 | 5 | 315 | RH | 80484191 |
| 6 | 65 | 6 | 315 | RH | 80484192 |
| 7 | 65 | 7 | 315 | RH | 80484193 |
| 8 | 65 | 8 | 315 | RH | 80484194 |
| 9 | 65 | 9 | 315 | RH | 80484195 |
| 10 | 65 | 10 | 315 | RH | 80484196 |
| 11 | 65 | 11 | 315 | RH | 80484197 |
| 12 | 65 | 12 | 315 | RH | 80484198 |
| 13 | 65 | 13 | 315 | RH | 80484199 |
| 14 | 65 | 14 | 315 | RH | 80484200 |
Joinery machines
also for Weinmann and Hundegger
for precise holes in all wood-based materials
2 spurs
Centering point
special coating
Deep hole spiral
chip-free hole edges thanks to spurs
centering point for safe spot drilling
long edge lives thanks to special coating
very good chip evacuation thanks to a deep hole spiral and a special coating
clamping element: draw-in collet chuck, drill chuck
