text.skipToContent
text.skipToNavigation
![192518]()
Clipping Saw Blades HW for edge trimming 'ES' - nn-System, with countersink
ID
192517
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 110 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | LH | 192515 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | RH | 192516 |
| 120 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | LH | 192517 |
| 120 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | RH | 192518 |
| 130 | 3.6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 0 | 10 | 30 | RH | 192529 |
| 130 | 3.6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 0 | 10 | 30 | LH | 192530 |
| 140 | 3.6 | 2.8 | 30 | 20+2 | 4/7,4/46 | 0 | -20 | 30 | RH | 192531 |
| 140 | 3.6 | 2.8 | 30 | 20+2 | 4/7,4/46 | 0 | -20 | 30 | LH | 192532 |
| 150 | 3.8 | 2.5 | 35 | 24+6 | 4/6/50 | 0 | 10 | 15 | RH | 192533 |
| 150 | 3.8 | 2.5 | 35 | 24+6 | 4/6/50 | 0 | 10 | 15 | LH | 192534 |
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 110 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | LH | 192515 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | RH | 192516 |
| 120 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | LH | 192517 |
| 120 | 3.2 | 2.5 | 40 | 20 | 4/6/52 | 5 | -6 | 45 | RH | 192518 |
| 130 | 3.6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 0 | 10 | 30 | RH | 192529 |
| 130 | 3.6 | 2.8 | 30 | 20+4 | 4/7,4/46 | 0 | 10 | 30 | LH | 192530 |
| 140 | 3.6 | 2.8 | 30 | 20+2 | 4/7,4/46 | 0 | -20 | 30 | RH | 192531 |
| 140 | 3.6 | 2.8 | 30 | 20+2 | 4/7,4/46 | 0 | -20 | 30 | LH | 192532 |
| 150 | 3.8 | 2.5 | 35 | 24+6 | 4/6/50 | 0 | 10 | 15 | RH | 192533 |
| 150 | 3.8 | 2.5 | 35 | 24+6 | 4/6/50 | 0 | 10 | 15 | LH | 192534 |
Image Legend
-
Cutting direction -
Cutting width 1 -
Corner angle -
Pin holes -
Hook angle -
Shear angle -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
edge banders
edge trimming machines
edge trimming machines
Application
for trimming of thin plastic-, veneer- and solid wood edges
Design
special NoNoise gullet geometry
positive or negative hook angle
with and without shear angle
pin holes with countersink
tooth configuration: top bevel "ES (right + left)"
cutting material: HW HL Board 06
positive or negative hook angle
with and without shear angle
pin holes with countersink
tooth configuration: top bevel "ES (right + left)"
cutting material: HW HL Board 06
Advantages
especially low noise level
noise reduction by approx. 6 dB(A) when idling
noise reduction by approx. 6 dB(A) when idling
Notes
sense of rotation see drawing
Diameter - Outermost cutting point
120
Cutting width 1
3.2
Clamping length
2.5
Bore / shank diameter
40
Number of teeth
20
Tooth configuration
Einseitig spitz links
Pin holes
4/6/52
RPM max
018000
Cutting direction
left-handed
Cutting material group
Hardmetal
Cutting material specification
HL Board06
Machine group
Through-feed machines
Machine type
Homag
Machine / Aggregate
Misc. clipping and miter saws
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO nn-System
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Solidwoodandsolidwoodproducts
Workpiece type
Glued laminated timber
Hard wood
Thermoplastics
Thermosetting plastics
Soft wood
Hard wood
Thermoplastics
Thermosetting plastics
Soft wood
Workpiece material
PP (polypropylene)
ABS (block material)
PE (block material)
Cross cut try hardwood
Veneered timber
PVC (block material)
HPL laminate
Cross cut dry
ABS (block material)
PE (block material)
Cross cut try hardwood
Veneered timber
PVC (block material)
HPL laminate
Cross cut dry