text.skipToContent
text.skipToNavigation
![192486]()
Clipping Saw Blades HW for edge trimming 'WS' - nn-System, with countersink
ID
192492
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 120 | 3.6 | 2.8 | 40 | 24 | 2x4/6/52 | 0 | 8 | 30 | UNI | 189751 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/5,5/52 | 5 | 10 | 45 | RH | 192479 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/5,5/52 | 5 | 10 | 45 | LH | 192480 |
| 110 | 3.2 | 2.2 | 40 | 30 | 4/6/52 | 0 | 10 | 45 | RH | 192481 |
| 120 | 3.2 | 2.5 | 40 | 36 | 2x4/5,5/52 | 5 | 10 | 45 | UNI | 192484 |
| 120 | 3.6 | 2.8 | 40 | 36 | 2x4/6/52 | 0 | 12 | 20 | UNI | 192485 |
| 125 | 2.4 | 1.6 | 40 | 24 | 2x4/5,8/60 | 0 | 15 | 30 | UNI | 192486 |
| 125 | 2.4 | 1.6 | 30 | 36 | 2x4/6,5/48 | 0 | 10 | 30 | UNI | 192487 |
| 140 | 3.2 | 2.2 | 30 | 36 | 4/8,6/46 | 5 | 10 | 15 | RH | 192490 |
| 140 | 3.2 | 2.2 | 30 | 36 | 4/8,6/46 | 5 | 10 | 15 | LH | 192491 |
| 150 | 3.6 | 2.8 | 40 | 30 | 4/6/52 | 0 | 8 | 30 | UNI | 192492 |
| 150 | 3.2 | 2.2 | 30 | 48 | 4/6/48 + 4/5,5/52 | 0 | 10 | 15 | RH | 192494 |
| 180 | 3.2 | 2.2 | 30 | 54 | 4/6/52 | 5 | 10 | 30 | LH | 192500 |
| 240 | 3.5 | 2.2 | 30 | 54 | 8/6,1/52 | 0 | 10 | 20 | LH | 192502 |
| 240 | 3.5 | 2.2 | 40 | 54 | 8/6,1/52 | 0 | 10 | 20 | LH | 192503 |
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 120 | 3.6 | 2.8 | 40 | 24 | 2x4/6/52 | 0 | 8 | 30 | UNI | 189751 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/5,5/52 | 5 | 10 | 45 | RH | 192479 |
| 110 | 3.2 | 2.5 | 40 | 20 | 4/5,5/52 | 5 | 10 | 45 | LH | 192480 |
| 110 | 3.2 | 2.2 | 40 | 30 | 4/6/52 | 0 | 10 | 45 | RH | 192481 |
| 120 | 3.2 | 2.5 | 40 | 36 | 2x4/5,5/52 | 5 | 10 | 45 | UNI | 192484 |
| 120 | 3.6 | 2.8 | 40 | 36 | 2x4/6/52 | 0 | 12 | 20 | UNI | 192485 |
| 125 | 2.4 | 1.6 | 40 | 24 | 2x4/5,8/60 | 0 | 15 | 30 | UNI | 192486 |
| 125 | 2.4 | 1.6 | 30 | 36 | 2x4/6,5/48 | 0 | 10 | 30 | UNI | 192487 |
| 140 | 3.2 | 2.2 | 30 | 36 | 4/8,6/46 | 5 | 10 | 15 | RH | 192490 |
| 140 | 3.2 | 2.2 | 30 | 36 | 4/8,6/46 | 5 | 10 | 15 | LH | 192491 |
| 150 | 3.6 | 2.8 | 40 | 30 | 4/6/52 | 0 | 8 | 30 | UNI | 192492 |
| 150 | 3.2 | 2.2 | 30 | 48 | 4/6/48 + 4/5,5/52 | 0 | 10 | 15 | RH | 192494 |
| 180 | 3.2 | 2.2 | 30 | 54 | 4/6/52 | 5 | 10 | 30 | LH | 192500 |
| 240 | 3.5 | 2.2 | 30 | 54 | 8/6,1/52 | 0 | 10 | 20 | LH | 192502 |
| 240 | 3.5 | 2.2 | 40 | 54 | 8/6,1/52 | 0 | 10 | 20 | LH | 192503 |
Image Legend
-
Cutting direction -
Cutting width 1 -
Corner angle -
Pin holes -
Hook angle -
Shear angle -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
edge trimming machines
Application
for trimming of plastic-, veneer- and solid wood edges
Design
special NoNoise gullet geometry
positive hook angle
with or without shear angle
pin holes with countersink
tooth configuration: alternate top bevel "WS"
cutting material: HW HL Board 06
positive hook angle
with or without shear angle
pin holes with countersink
tooth configuration: alternate top bevel "WS"
cutting material: HW HL Board 06
Advantages
especially low noise level
noise reduction by approx. 6 dB(A) when idling
noise reduction by approx. 6 dB(A) when idling
Notes
Ident-No. 192494 NL=4/5,5/52 have no countersink
sense of rotation according to VDMA 8849
Diameter - Outermost cutting point
150
Cutting width 1
3.6
Clamping length
2.8
Bore / shank diameter
40
Number of teeth
30
Tooth configuration
Alternate top bevel
Pin holes
4/6/52
RPM max
015300
Cutting direction
universal
Cutting material group
Hardmetal
Cutting material specification
HL Board06
Machine group
Through-feed machines
Machine type
Biesse
Machine / Aggregate
Biesse Akron 600/800
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO nn-System
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Trimming
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Solidwoodandsolidwoodproducts
Workpiece type
Thermoplastics
Thermosetting plastics
Soft wood
Hard wood
Glued laminated timber
Thermosetting plastics
Soft wood
Hard wood
Glued laminated timber
Workpiece material
Cross cut try hardwood
ABS (block material)
PVC (block material)
HPL laminate
Cross cut dry
Veneered timber
ABS (block material)
PVC (block material)
HPL laminate
Cross cut dry
Veneered timber