text.skipToContent
text.skipToNavigation
![188101]()
Gang-Rip Saw Blades HW with HW-rakers 'F'
ID
189294
Product variants
Product variants
| DA | SB1 | IML | IMD | IMDmax | FDmax | IMS | Z | ZF1 | NL | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 180 | 2.4 | 1.6 | 40 | 55 | 95 | 16 | 2 | 188096 | ||
| 200 | 2 | 1.4 | 40 | 75 | 115 | 16 | 002 | 188097 | ||
| 200 | 2.4 | 1.6 | 40 | 75 | 115 | 16 | 2 | 188098 | ||
| 225 | 2.4 | 1.6 | 40 | 80 | 120 | 16 | 2 | 188100 | ||
| 250 | 2.4 | 1.6 | 40 | 80 | 125 | 16 | 2 | 188101 | ||
| 250 | 2.8 | 1.8 | 70 | 125 | 20x5 | 24 | 002 | 189290 | ||
| 300 | 3.2 | 2.2 | 70 | 120 | 20,0x5 | 16 | 004 | 189293 | ||
| 300 | 3.2 | 2.2 | 70 | 120 | 20,0x5 | 28 | 004 | 189294 | ||
| 300 | 3.2 | 2.2 | 80 | 125 | 18,5x5 | 16 | 004 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 189295 | |
| 300 | 3.4 | 2.2 | 80 | 120 | 12,5x4,5 | 16 | 004 | 189296 | ||
| 350 | 3.5 | 2.5 | 70 | 120 | 20x5 | 20 | 004 | 189297 | ||
| 350 | 3.8 | 2.5 | 80 | 125 | 18,5x5 | 20 | 004 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 189299 |
| DA | SB1 | IML | IMD | IMDmax | FDmax | IMS | Z | ZF1 | NL | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 180 | 2.4 | 1.6 | 40 | 55 | 95 | 16 | 2 | 188096 | ||
| 200 | 2 | 1.4 | 40 | 75 | 115 | 16 | 002 | 188097 | ||
| 200 | 2.4 | 1.6 | 40 | 75 | 115 | 16 | 2 | 188098 | ||
| 225 | 2.4 | 1.6 | 40 | 80 | 120 | 16 | 2 | 188100 | ||
| 250 | 2.4 | 1.6 | 40 | 80 | 125 | 16 | 2 | 188101 | ||
| 250 | 2.8 | 1.8 | 70 | 125 | 20x5 | 24 | 002 | 189290 | ||
| 300 | 3.2 | 2.2 | 70 | 120 | 20,0x5 | 16 | 004 | 189293 | ||
| 300 | 3.2 | 2.2 | 70 | 120 | 20,0x5 | 28 | 004 | 189294 | ||
| 300 | 3.2 | 2.2 | 80 | 125 | 18,5x5 | 16 | 004 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 189295 | |
| 300 | 3.4 | 2.2 | 80 | 120 | 12,5x4,5 | 16 | 004 | 189296 | ||
| 350 | 3.5 | 2.5 | 70 | 120 | 20x5 | 20 | 004 | 189297 | ||
| 350 | 3.8 | 2.5 | 80 | 125 | 18,5x5 | 20 | 004 | 6/5,5/91 + 4/6,6/95 + 2/13/100 | 189299 |
Image Legend
-
Cutting width 1 -
Interface towards the machine specification -
Number of teeth flange/raker/front -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
molders
gang-rip saws with one or two shafts
gang-rip saws with one or two shafts
Application
for longitudinal cuts in wet and dry soft woods
Design
tooth configuration: flat "F"
cutting material: HW HL Board 20
type A and C with staggered double keyways
cutting material: HW HL Board 20
type A and C with staggered double keyways
Advantages
tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes
for inquiries / orders enclose specification sheet (see appendix)
for cutting height >50 mm
Diameter - Outermost cutting point
300
Cutting width 1
3.2
Clamping length
2.2
Bore / shank diameter
70
Flange diameter max
120
Interface towards the machine specification
20,0x5
Number of teeth
28
Number of teeth flange/raker/front
004
Tooth configuration
Flat tooth
RPM max
006400
Cutting direction
universal
Cutting material group
Hardmetal
Cutting material specification
HL Board20
Machine group
sawing machines
Machine type
Gang-rip saws
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO topline
Scope of application
Machining of solid wood
Application
saw mills / planing mills
Processing step
trimming cut saw/planung mill
Workpiece material
Solidwoodandsolidwoodproducts
Workpiece type
Soft wood
Workpiece material
Longitudinal cut wet softwood
Longitudinal cut dry
Longitudinal cut dry