text.skipToContent text.skipToNavigation
Tool Types
Pre-Cut Gang-Rip Saw Blades HW with HW-rakers 'F' - Linck ID 80254381
80283375
80229167-ECOM
LOG_FIR_LEUCO-DUR-Katalog-w_#SALL_#AIN_#V1.png LOG_FIR_LEUCO-Topline-Katalog-w_#SALL_#AIN_#V1.png

Product variants

Product variants
DA SB1 b ND IML IMD IMS Z ZF1 NL DR1 Mat.-No.
540 4.2 2.8 235 5.1 145 20x7 24 006 8/12,5/165 RH 80245192
540 4.2 2.8 235 5.1 145 20x7 24 006 8/12,5/165 LH 80245193
648 5.6 3.8 210 6.8 160   24 008 8/11/185 RH 80250584
648 5.6 3.8 210 6.8 160   24 008 8/11/185 LH 80250585
445 4.8 3.2 190 6.8 120   28 004 4/13/156 RH 80250723
445 4.8 3.2 190 6.8 120   28 004 4/13/156 LH 80250724
550 5.2     3.5 120   24 006 8/18/155 RH 80254381
550 5.2     3.5 120   24 006 8/18/155 LH 80254383
695 5 3.4 350 6.8 170 20x5 50 008 12/12/195 RH 80258264
695 5 3.4 350 6.8 170 20x5 50 008 12/12/195 LH 80258266
540 5 3.4 205 6.8 150   24 006 8/12/180 RH 80268478
540 5 3.4 205 6.8 150   24 006 8/12/180 LH 80268479
520 5     3.2 110   32 006 12/13/140 UNI 80269113
525 4.8 3.2 240 6.8 160   28 006 6/12/210 RH 80279579
525 4.8 3.2 240 6.8 160   28 006 6/12/210 LH 80279581
505 5.6 3.8 190 6.8 120   28 004 8/14,5/156 LH 80281372
505 5.6 3.8 190 6.8 120   28 004 8/14,5/156 RH 80281373
540 4.8 3.2 205 6.8 150   28 006 8/11/180 RH 80283375
540 4.8 3.2 190 6.8 150   28 006 8/11/180 LH 80283376
470 5 3.6 190 6.8 120   28 006 8/13/156 RH 80290357
470 5 3.6 190 6.8 120   28 006 8/13/156 LH 80290358
525 5.6 4 190 6.8 120   24 006 6/13/156 RH 80307584
525 5.6 4 190 6.8 120   24 006 6/13/156 LH 80307585
540 5.2 3.4 205 6.8 150   28 006 8/12/180 LH 80333677
540 5.2 3.4 205 6.8 150   28 006 8/12/180 RH 80333678
580 5 3.2 250 5.2 145 20x5 32 006 8/12/165 LH 80333690
580 5 3.2 250 5.2 145 20x5 32 006 8/12/165 RH 80333692
DA SB1 b ND IML IMD IMS Z ZF1 NL DR1 Mat.-No.
540 4.2 2.8 235 5.1 145 20x7 24 006 8/12,5/165 RH 80245192
540 4.2 2.8 235 5.1 145 20x7 24 006 8/12,5/165 LH 80245193
648 5.6 3.8 210 6.8 160   24 008 8/11/185 RH 80250584
648 5.6 3.8 210 6.8 160   24 008 8/11/185 LH 80250585
445 4.8 3.2 190 6.8 120   28 004 4/13/156 RH 80250723
445 4.8 3.2 190 6.8 120   28 004 4/13/156 LH 80250724
550 5.2     3.5 120   24 006 8/18/155 RH 80254381
550 5.2     3.5 120   24 006 8/18/155 LH 80254383
695 5 3.4 350 6.8 170 20x5 50 008 12/12/195 RH 80258264
695 5 3.4 350 6.8 170 20x5 50 008 12/12/195 LH 80258266
540 5 3.4 205 6.8 150   24 006 8/12/180 RH 80268478
540 5 3.4 205 6.8 150   24 006 8/12/180 LH 80268479
520 5     3.2 110   32 006 12/13/140 UNI 80269113
525 4.8 3.2 240 6.8 160   28 006 6/12/210 RH 80279579
525 4.8 3.2 240 6.8 160   28 006 6/12/210 LH 80279581
505 5.6 3.8 190 6.8 120   28 004 8/14,5/156 LH 80281372
505 5.6 3.8 190 6.8 120   28 004 8/14,5/156 RH 80281373
540 4.8 3.2 205 6.8 150   28 006 8/11/180 RH 80283375
540 4.8 3.2 190 6.8 150   28 006 8/11/180 LH 80283376
470 5 3.6 190 6.8 120   28 006 8/13/156 RH 80290357
470 5 3.6 190 6.8 120   28 006 8/13/156 LH 80290358
525 5.6 4 190 6.8 120   24 006 6/13/156 RH 80307584
525 5.6 4 190 6.8 120   24 006 6/13/156 LH 80307585
540 5.2 3.4 205 6.8 150   28 006 8/12/180 LH 80333677
540 5.2 3.4 205 6.8 150   28 006 8/12/180 RH 80333678
580 5 3.2 250 5.2 145 20x5 32 006 8/12/165 LH 80333690
580 5 3.2 250 5.2 145 20x5 32 006 8/12/165 RH 80333692

Image Legend

  • GRA_MKM_FBJ_FBJ-D7_#SALL_#AIN_#V1.png
    Cutting direction
  • GRA_MKM_FBJ_FBJ-B31_#SALL_#AIN_#V1.png
    Cutting width 1
  • GRA_MKM_ZBJ_ZBJ-N1_#SALL_#AIN_#V1.png
    Pin holes
  • GRA_MKM_KSN_KSN-Z61_#SALL_#AIN_#V1.png
    Number of teeth flange/raker/front
  • GRA_MKM_ALG_IMD-ITD_#SALL_#AIN_#V1.png
    Bore / shank diameter
  • GRA_MKM_ALG_IML_#SALL_#AIN_#V1.png
    Clamping length
  • GRA_MKM_FBJ_FBJ-Z2_#SALL_#AIN_#V1.png
    Number of teeth
  • GRA_MKM_ALG_DA_#SALL_#AIN_#V1.png
    Diameter - Outermost cutting point

Product Details

Description
Maschine
primary machines with and without chippers
Application
for longitudinal cuts in wet and dry soft woods
Design
tooth configuration: flat "F"
cutting material: HW HL Board 20
type A and C with staggered double keyways
Advantages
extremely high bending strength and hardness of the teeth
tungsten carbide rakers prevent the sides of the wood from making contact with the steel plate
staggering the types (A-C-A etc.) on the shaft creates a cut division that puts less pressure on the machine
Notes

the saw blade is optimized according to the LEUCO company standards as well as according to the customers specifications and machine parameters after consultation with the technical engineering
Ident-No. is only for orientation

Technical Data
Diameter - Outermost cutting point
550
Cutting width 1
5.2
Clamping length
3.5
Bore / shank diameter
120
Number of teeth
24
Number of teeth flange/raker/front
006
Tooth configuration
Flat tooth
Pin holes
8/18/155
RPM max
003500
Cutting direction
right-handed
Cutting material group
Hardmetal
Cutting material specification
HL Board20
Machine group
sawing machines
Machine type
Primary machines
Machine / Aggregate
Linck VS
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO topline
Scope of application
Machining of solid wood
Application
saw mills / planing mills
Processing step
pre-cut
Workpiece material
Solidwoodandsolidwoodproducts
Workpiece type
Soft wood
Workpiece material
Longitudinal cut wet softwood
Longitudinal cut dry

Downloads