text.skipToContent
text.skipToNavigation
Edge Chamfering Cutters DP HSK 25R - Homag FF, IMA
ID
180581
Product variants
Product variants
DMP1 | ABev | DA | LMP1 | IML | IM | IMD | Z | DR1 | Mat.-No. |
---|---|---|---|---|---|---|---|---|---|
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 4 | LH | 180578 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 4 | RH | 180579 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 4 | LH | 180580 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 4 | RH | 180581 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 6 | LH | 180582 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 6 | RH | 180583 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 6 | LH | 180584 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 6 | RH | 180585 |
DMP1 | ABev | DA | LMP1 | IML | IM | IMD | Z | DR1 | Mat.-No. |
---|---|---|---|---|---|---|---|---|---|
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 4 | LH | 180578 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 4 | RH | 180579 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 4 | LH | 180580 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 4 | RH | 180581 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 6 | LH | 180582 |
70 | 20 | 73 | 19.5 | 22.2 | HSK-R | 25 | 6 | RH | 180583 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 6 | LH | 180584 |
70 | 45 | 78.7 | 19.5 | 22.2 | HSK-R | 25 | 6 | RH | 180585 |
Image Legend
Product Details
Maschine
edge banding machines Homag aggregate FF, IMA
Application
for chamfering of solid wood, veneer and plastic edge bands
Design
polished face
high-finish clearance angle
with shear angle
high-finish clearance angle
with shear angle
Advantages
optimum cutting quality thanks to high concenctric accuracy and precise tool balancing
optimized chip removal thanks to internal chip evacuation
less chips remain inside of the machine
no malfunctions due to chips
reduction of suction power
noise reduced
optimized chip removal thanks to internal chip evacuation
less chips remain inside of the machine
no malfunctions due to chips
reduction of suction power
noise reduced
Notes
constant basic dimensions a and D1
Z = 4 for feed rate 20 - 30 m/min
Z = 6 for feed rate 30 - 45 m/min
machines must be equipped with i-System
sense of rotation according to VDMA 8849
Diameter 1
70
Chamfer angle 1
45
Diameter - Outermost cutting point
78.7
Cutting width 1
5.6
Length
19.5
Interface towards the machine
HSK-R
Bore / shank diameter
25
Number of teeth
4
RPM max
018000
Cutting material group
Diamond, polycrystalline
Machine group
Through-feed machines
Machine type
Homag
IMA
IMA
Machine / Aggregate
Homag - Aggregat FF und Feinfr
Brand name LEUCO
i-System
Quality level LEUCO
LEUCO topline
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Profile cutting
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Wood-based panels
Solidwoodandsolidwoodproducts
Wood-based panels
Workpiece type
HDF
MDF
Thermoplastics
Soft wood
Glued laminated timber
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
MDF
Thermoplastics
Soft wood
Glued laminated timber
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
Workpiece material
Particle board-melamcoverlay
MDF (lacquered)
PP (polypropylene)
Glued laminated timber board
PVC (block material)
KVH
PE (block material)
PVC (foil)
Veneered timber
Acrylic glass (PMMA)
MDF (raw)
BSH
Longitudinal cut dry
Spanplatte (HPL beschichtet)
ABS (block material)
HDF (panel material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)
MDF (lacquered)
PP (polypropylene)
Glued laminated timber board
PVC (block material)
KVH
PE (block material)
PVC (foil)
Veneered timber
Acrylic glass (PMMA)
MDF (raw)
BSH
Longitudinal cut dry
Spanplatte (HPL beschichtet)
ABS (block material)
HDF (panel material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)