text.skipToContent
text.skipToNavigation
![185453]()
Edge Chamfering Trimming Cutter CM DP - HOLZ-HER 1826 - AirStream-System
ID
185878
Product variants
Product variants
| DMP1 | ABev | DA | LMP1 | IML | IMD | IMS | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 68 | 45 | 70.5 | 14 | 12.5 | 16 | 5X2,3 | 2+2 | RH | 185453 |
| 68 | 45 | 70.5 | 11 | 12.5 | 16 | 5X2,3 | 2+2 | LH | 185878 |
Image Legend
-
Cutting direction -
Interface towards the machine specification -
Bore / shank diameter -
Clamping length -
Number of teeth -
Chamfer angle 1 -
Diameter - Outermost cutting point -
Length -
Diameter 1
Product Details
Maschine
edge banding machines HOLZ-HER aggregate FR701
Application
for chamfering and flush-cutting of solid wood, veneer and plastic edge bands
Design
with shear angle
polished face and high-finish clearance angle
AirStream-System
n max = 24,000 min-1
polished face and high-finish clearance angle
AirStream-System
n max = 24,000 min-1
Advantages
considerably increased chip caption degree thanks to AirStream-System
less chips remain inside of the machine
no malfunctions due to chips
reduction of suction power
very low noise level
less chips remain inside of the machine
no malfunctions due to chips
reduction of suction power
very low noise level
Notes
constant basic dimensions a and D1
sense of rotation according to VDMA 8849
not for resharpening
Diameter 1
68
Chamfer angle 1
45
Diameter - Outermost cutting point
70.5
Cutting width 1
16.72
Length
11
Interface towards the machine
Bore-DKW
Bore / shank diameter
16
Total length
16.72
Number of teeth
2+2
RPM min
000000
RPM max
024000
Cutting material group
Diamond, polycrystalline
Machine group
Through-feed machines
Machine type
HOLZHER
Machine / Aggregate
HOLZ-HER FR701
Brand name LEUCO
DIAMAX
Quality level LEUCO
LEUCO AirStream
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Pre-Trimming
Profile cutting
Profile cutting
Workpiece material
Solidwoodandsolidwoodproducts
Plastics
Wood-based panels
Plastics
Wood-based panels
Workpiece type
MDF
Glued laminated timber
Thermoplastics
Soft wood
HDF
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
Glued laminated timber
Thermoplastics
Soft wood
HDF
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
Workpiece material
Particle board-melamcoverlay
PP (polypropylene)
KVH
Acrylic glass (PMMA)
MDF (lacquered)
Glued laminated timber board
Longitudinal cut dry
PVC (block material)
HDF (panel material)
Spanplatte (HPL beschichtet)
PVC (foil)
MDF (raw)
BSH
Veneered timber
PE (block material)
ABS (block material)
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)
Particleboard-highglossfoiled
PP (polypropylene)
KVH
Acrylic glass (PMMA)
MDF (lacquered)
Glued laminated timber board
Longitudinal cut dry
PVC (block material)
HDF (panel material)
Spanplatte (HPL beschichtet)
PVC (foil)
MDF (raw)
BSH
Veneered timber
PE (block material)
ABS (block material)
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)
Particleboard-highglossfoiled