text.skipToContent
text.skipToNavigation
![186786]()
DIAMAX Multi-profile edge trimming cutter DP - HOLZ-HER FR502 Multi - AirStream-System
ID
186916
Product variants
Product variants
| R2 | R3 | BA3 | DA | SB1 | IML | IMD | IMS | Z | DR1 | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1.3 | 55.8 | 8 | 12.5 | 16 | 5x2,3 | 2 | RH | 186786 | |
| 2 | 1.3 | 55.8 | 8 | 12.5 | 16 | 5x2,3 | 2 | LH | 186787 | |
| 2 | 25 | 55.2 | 8 | 12.5 | 16 | 5x2,3 | 2 | RH | 186916 | |
| 2 | 25 | 55.2 | 8 | 12.5 | 16 | 5x2,3 | 2 | LH | 186917 |
Image Legend
-
Chamfer angle 3 -
Cutting direction -
Cutting width 1 -
Interface towards the machine specification -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point -
Radius 2
Product Details
Maschine
edge banding machines HOLZ-HER aggregate FR502
Application
for flush-cutting, rounding and chamfering of solid wood, veneer and plastic edge bands
Design
with shear angle
polished face and high-finish clearance angle
AirStream-System
n max = 24,000 min-1
polished face and high-finish clearance angle
AirStream-System
n max = 24,000 min-1
Advantages
Significantly increased chip caption degree thanks to AirStream-System
No contamination of the machine with chips
No malfunctions due to chips
Reduction of the extraction output
Very low noise level
No contamination of the machine with chips
No malfunctions due to chips
Reduction of the extraction output
Very low noise level
Notes
not for resharpening
constant basic dimensions
sense of rotation according to VDMA 8849
Diameter 1
50
Radius 2
2
Chamfer angle 1
45
Chamfer angle 3
25
Diameter - Outermost cutting point
55.2
Diameter 2
49.23
Cutting width 1
8
Length [LMP2] [mm]
28.331
Interface towards the machine
Bore-DKW
Bore / shank diameter
16
Total length
41
Number of teeth
2
RPM max
024000
Cutting material group
Diamond, polycrystalline
Machine group
Through-feed machines
Machine type
HOLZHER
Machine / Aggregate
HOLZ-HER FR502
Brand name LEUCO
DIAMAX
Quality level LEUCO
LEUCO AirStream
Scope of application
through-feed processing
Application
Edge trimming refinishing
Processing step
Profile cutting
Workpiece material
Solidwoodandsolidwoodproducts
Plastics
Wood-based panels
Plastics
Wood-based panels
Workpiece type
MDF
Thermoplastics
Soft wood
HDF
Glued laminated timber
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
Thermoplastics
Soft wood
HDF
Glued laminated timber
Hard wood
Solid wood and veneered mat
Particle boards
Laminated particle board
Workpiece material
Particle board-melamcoverlay
PP (polypropylene)
MDF (lacquered)
Acrylic glass (PMMA)
Spanplatte (HPL beschichtet)
MDF (raw)
PVC (foil)
Longitudinal cut dry
KVH
PE (block material)
HDF (panel material)
Glued laminated timber board
BSH
Veneered timber
ABS (block material)
PVC (block material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)
PP (polypropylene)
MDF (lacquered)
Acrylic glass (PMMA)
Spanplatte (HPL beschichtet)
MDF (raw)
PVC (foil)
Longitudinal cut dry
KVH
PE (block material)
HDF (panel material)
Glued laminated timber board
BSH
Veneered timber
ABS (block material)
PVC (block material)
Particleboard-highglossfoiled
Longitudinal cut dry hardwood
Plywood
Multiplex
Wood core plywood
Particle board (raw)
Particle board (CPL-coated)
Particle board (veneered)