text.skipToContent
text.skipToNavigation
![182682]()
Finger Joint Cutters 20/20 for PU glueing Real Z
ID
187586
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | ZL | NF | nMax | Cut_Mat | Mat.-No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 180 | 39.6 | 18.6 | 50 | 3 | 6.2 | 20/20 | 0003 | 008000 | HS | 187579 | |
| 180 | 39.6 | 18.6 | 50 | 3 | 6.2 | 20/20 | 0003 | 008000 | HS | TC104 | 187580 |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | 187586 | |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | TC104 | 187587 |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | 187591 | |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | TC104 | 187593 |
| DA | SB1 | IML | IMD | Z | ZL | NF | nMax | Cut_Mat | Mat.-No. | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 180 | 39.6 | 18.6 | 50 | 3 | 6.2 | 20/20 | 0003 | 008000 | HS | 187579 | |
| 180 | 39.6 | 18.6 | 50 | 3 | 6.2 | 20/20 | 0003 | 008000 | HS | TC104 | 187580 |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | 187586 | |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | TC104 | 187587 |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | 187591 | |
| 180 | 27.2 | 16.7 | 50 | 3 | 6.2 | 20/20 | 0002 | 008000 | HS | TC104 | 187593 |
Image Legend
-
-
Finger joint length -
Cutting width 1 -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point -
Number of finger joints
Product Details
Maschine
finger joint machines
machines without cross-cutting device
Application
For longitudinal joints in soft, hard and exotic woods, with a finger length of 20 mm
Flexible tool for finger joints when using fibrous and non-fibrous PU glue
Design
Standard for PUR glueing
Real Z=3 for high feed rates
Finger length of 20 mm
HS suitable for soft woods
HS Solid 34 suitable for knotty soft woods
Advantages
HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters
Notes
no. of cutters: see table
Diameter 1
180
Diameter - Outermost cutting point
180
Cutting width 1
27.2
Bore / shank diameter
50
Number of teeth
3
Finger joint length
20/20
Number of finger joints
0002
RPM max
008000
Cutting material group
High speed steel (HSS)