text.skipToContent text.skipToNavigation
Finger Joint Cutters 15/15 Real Z ID 187467
OR-ECOM

Product variants

Product variants
DA SB1 IML IMD Z ZL NF nMax Cut_Mat Mat.-No.
170 41 19 50 4 3.8 15/15 0005 008000 HS TC104 187452
170 41 19 50 4 3.8 15/15 0005 008000 HS   187454
170 41   50 4 3.8 15/15 0005 008000 HS TC104 187456
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS   187460
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS   187462
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS TC104 187463
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS TC104 187466
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS   187467
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS   187469
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS TC104 187470
180 19 19 50 5 3.8 15/15 0005 006000 HS TC104 187473
180 25.8 14.8 50 5 3.8 15/15 0003 006000 HS TC104 187476
180 25.8 14.8 50 5 3.8 15/15 0003 006000 HS TC104 187479
170 41 19 50 4 3.8 15/15 0005 008000 HS   187712
170 25.8 14.8 50 4 3.8 15/15 0003 008000 HS TC104 187713

Image Legend

  • GRA_MKM_FBJ_FBJ-T6_#SALL_#AIN_#V1.png
  • GRA_MKM_FBJ_FBJ-B31_#SALL_#AIN_#V1.png
    Cutting width 1
  • GRA_MKM_FBJ_FBJ-Z5_#SALL_#AIN_#V1.png
    Number of finger joints
  • GRA_MKM_FBJ_FBJZ4_#SALL_#AIN_#V1.png
    Finger joint length
  • GRA_MKM_ALG_IMD-ITD_#SALL_#AIN_#V1.png
    Bore / shank diameter
  • GRA_MKM_ALG_IML_#SALL_#AIN_#V1.png
    Clamping length
  • GRA_MKM_FBJ_FBJ-Z2_#SALL_#AIN_#V1.png
    Number of teeth
  • GRA_MKM_ALG_DA_#SALL_#AIN_#V1.png
    Diameter - Outermost cutting point

Product Details

Maschine

finger joint machines
machines with cross-cutting device

Application

For longitudinal joints in soft, hard and exotic woods, with a finger length of 15 mm

Design

Real Z=4 or Z=5 for high feed rates
Finger length of 15 mm
HS suitable for soft woods
HS Solid 34 suitable for knotty soft woods

Advantages

HS Solid 34: high bending strength, compared to HS finger joint cutters the edge life is 1.5 - 2 times as long
topcoat 104: the edge life is 2 times as long compared to HS finger joint cutters

Notes

no. of cutters: see table

Diameter 1
170
Diameter - Outermost cutting point
170
Cutting width 1
25.8
Bore / shank diameter
50
Number of teeth
4
Finger joint length
15/15
Number of finger joints
0003
RPM max
008000
Cutting material group
High speed steel (HSS)

Downloads