text.skipToContent
text.skipToNavigation
![192464]()
Clipping Saw Blades HW for edge trimming 'WS' - nn-System without countersink
ID
192493
Product variants
Product variants
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 160 | 3 | 2.5 | 22 | 36 | 0 | -5 | 15 | 192456 | |
| 90 | 3 | 2 | 30 | 20 | 0 | 8 | 10 | 192471 | |
| 100 | 2.4 | 1.6 | 22 | 12 | 5 | 15 | 10 | 192472 | |
| 100 | 3.6 | 2.2 | 32 | 20 | 5 | 8 | 30 | 192474 | |
| 100 | 3.2 | 2.2 | 22 | 20 | 0 | 8 | 15 | 192475 | |
| 100 | 2.6 | 1.6 | 32 | 30 | 5 | 10 | 15 | 192476 | |
| 110 | 3.6 | 2.5 | 22 | 20 | 5 | 8 | 30 | 192477 | |
| 110 | 3.6 | 2.5 | 32 | 20 | 5 | 8 | 30 | 192478 | |
| 115 | 3.2 | 2.2 | 56 | 30 | 3/7,1/68 + 3/7,1/68 | 0 | 15 | 15 | 192482 |
| 120 | 3.2 | 2.2 | 32 | 20 | 5 | 10 | 10 | 192483 | |
| 140 | 3.2 | 2.2 | 22 | 36 | 5 | 10 | 15 | 192488 | |
| 140 | 3.2 | 2.2 | 16 | 36 | 5 | 10 | 15 | 192489 | |
| 150 | 3.2 | 2.2 | 22 | 48 | 5 | 10 | 10 | 192493 | |
| 160 | 3.2 | 2.2 | 30 | 24 | 2/7/42 | 5 | 15 | 10 | 192495 |
| 160 | 3.2 | 2.2 | 40 | 30 | 4/5,5/52 | 10 | -8 | 20 | 192496 |
| 160 | 3.2 | 2.2 | 20 | 48 | 2/5/32 | 5 | 10 | 10 | 192497 |
| 160 | 3.2 | 2.2 | 22 | 48 | 5 | -8 | 10 | 192498 | |
| 200 | 3.2 | 2.2 | 30 | 64 | 4/6,6/60 + 2/6,2/42 | 0 | 10 | 15 | 192501 |
| 100 | 2.4 | 1.6 | 22 | 20 | 2/4/30 | 5 | -8 | 10 | 193352 |
| 104 | 3 | 2 | 22 | 30 | 0 | 10 | 15 | 193353 | |
| 170 | 3.2 | 2.2 | 30 | 36 | 4/5.5/52 | 0 | 10 | 20 | 193354 |
| 115 | 3.2 | 2.2 | 30 | 30 | 0 | 10 | 30 | 80443014 | |
| 100 | 2.4 | 1.6 | 22 | 30 | 2/4/30 | 5 | -8 | 10 | 80465377 |
| 100 | 2.4 | 1.4 | 22 | 30 | 2/4/30 | 0 | 10 | 15 | 80484044 |
| DA | SB1 | IML | IMD | Z | NL | AShear | W_Span | CornerAngle | Mat.-No. |
|---|---|---|---|---|---|---|---|---|---|
| 160 | 3 | 2.5 | 22 | 36 | 0 | -5 | 15 | 192456 | |
| 90 | 3 | 2 | 30 | 20 | 0 | 8 | 10 | 192471 | |
| 100 | 2.4 | 1.6 | 22 | 12 | 5 | 15 | 10 | 192472 | |
| 100 | 3.6 | 2.2 | 32 | 20 | 5 | 8 | 30 | 192474 | |
| 100 | 3.2 | 2.2 | 22 | 20 | 0 | 8 | 15 | 192475 | |
| 100 | 2.6 | 1.6 | 32 | 30 | 5 | 10 | 15 | 192476 | |
| 110 | 3.6 | 2.5 | 22 | 20 | 5 | 8 | 30 | 192477 | |
| 110 | 3.6 | 2.5 | 32 | 20 | 5 | 8 | 30 | 192478 | |
| 115 | 3.2 | 2.2 | 56 | 30 | 3/7,1/68 + 3/7,1/68 | 0 | 15 | 15 | 192482 |
| 120 | 3.2 | 2.2 | 32 | 20 | 5 | 10 | 10 | 192483 | |
| 140 | 3.2 | 2.2 | 22 | 36 | 5 | 10 | 15 | 192488 | |
| 140 | 3.2 | 2.2 | 16 | 36 | 5 | 10 | 15 | 192489 | |
| 150 | 3.2 | 2.2 | 22 | 48 | 5 | 10 | 10 | 192493 | |
| 160 | 3.2 | 2.2 | 30 | 24 | 2/7/42 | 5 | 15 | 10 | 192495 |
| 160 | 3.2 | 2.2 | 40 | 30 | 4/5,5/52 | 10 | -8 | 20 | 192496 |
| 160 | 3.2 | 2.2 | 20 | 48 | 2/5/32 | 5 | 10 | 10 | 192497 |
| 160 | 3.2 | 2.2 | 22 | 48 | 5 | -8 | 10 | 192498 | |
| 200 | 3.2 | 2.2 | 30 | 64 | 4/6,6/60 + 2/6,2/42 | 0 | 10 | 15 | 192501 |
| 100 | 2.4 | 1.6 | 22 | 20 | 2/4/30 | 5 | -8 | 10 | 193352 |
| 104 | 3 | 2 | 22 | 30 | 0 | 10 | 15 | 193353 | |
| 170 | 3.2 | 2.2 | 30 | 36 | 4/5.5/52 | 0 | 10 | 20 | 193354 |
| 115 | 3.2 | 2.2 | 30 | 30 | 0 | 10 | 30 | 80443014 | |
| 100 | 2.4 | 1.6 | 22 | 30 | 2/4/30 | 5 | -8 | 10 | 80465377 |
| 100 | 2.4 | 1.4 | 22 | 30 | 2/4/30 | 0 | 10 | 15 | 80484044 |
Image Legend
-
Cutting width 1 -
Corner angle -
Hook angle -
Shear angle -
Bore / shank diameter -
Clamping length -
Number of teeth -
Diameter - Outermost cutting point
Product Details
Maschine
edge banders
edge trimming machines
edge trimming machines
Application
for trimming of plastic-, veneer- and solid wood edges
Design
special NoNoise gullet geometry
positive or negative hook angle
with or without shear angle
tooth configuration: alternate top bevel "WS"
cutting material: HW HL Board 06
positive or negative hook angle
with or without shear angle
tooth configuration: alternate top bevel "WS"
cutting material: HW HL Board 06
Advantages
especially low noise level
noise reduction by approx. 6 dB(A) when idling
noise reduction by approx. 6 dB(A) when idling
Diameter - Outermost cutting point
150
Cutting width 1
3.2
Clamping length
2.2
Bore / shank diameter
22
Number of teeth
48
Tooth configuration
Alternate top bevel
RPM max
015300
Cutting direction
universal
Cutting material group
Hardmetal
Cutting material specification
HL Board06
Machine group
Through-feed machines
Machine type
IMA
Machine / Aggregate
Misc. clipping and miter saws
Brand name LEUCO
LEUCODUR
Quality level LEUCO
LEUCO nn-System
Workpiece material
Plastics
Solidwoodandsolidwoodproducts
Solidwoodandsolidwoodproducts
Workpiece type
Glued laminated timber
Hard wood
Thermoplastics
Thermosetting plastics
Soft wood
Hard wood
Thermoplastics
Thermosetting plastics
Soft wood
Workpiece material
Veneered timber
PP (polypropylene)
ABS (block material)
PE (block material)
Cross cut try hardwood
PVC (block material)
HPL laminate
Cross cut dry
PP (polypropylene)
ABS (block material)
PE (block material)
Cross cut try hardwood
PVC (block material)
HPL laminate
Cross cut dry