26
| DA | IMD | SB1 | IML | NL | ZK | Z | ZD1 | IM | CMS1 | CUTMAT1 | Dmax | DRP1 | DR1 | feedType | productDim | m | nMax | nMin | Weck | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DA: 100 | IMD: 32 | SB1: 3 | IML: 2.2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 20 | ZD1: 20 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 100x3,0x32 Z=20, L,ES | m: 0.111527356 | nMax: 18000 | nMin: - | Weck: 30 | ||
| DA: 100 | IMD: 32 | SB1: 3 | IML: 2.2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 20 | ZD1: 20 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 100x3,0x32 Z=20, R,ES | m: 0.111527356 | nMax: 18000 | nMin: - | Weck: 30 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: 30 | IM: Bohrung [BO] | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 280 | DRP1: 100 | DR1: linksdrehend [LH] | feedType: mechanischer Vorschub [MEC] | productDim: 100x2,6/1,6x32 Z=30, L,ES | m: 0.085267695 | nMax: 6900 | nMin: - | Weck: 10 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 100x2,6x32 Z=30, R,ES | m: 0.085 | nMax: 18000 | nMin: - | Weck: 10 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 100x2,6/2,0x32 Z30, R,ES | m: 0.18 | nMax: 18000 | nMin: - | Weck: 15 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 100x2,6/2,0x32 Z30, L,ES | m: 0.18 | nMax: 18000 | nMin: - | Weck: 15 | ||
| DA: 150 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 150x3,5/2,2x30 Z30, L,ES | m: 0.4 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 150 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 150x3,5/2,2x30 Z30, R,ES | m: 0.4 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 160 | IMD: 40 | SB1: 3.6 | IML: 2.5 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 18 | ZD1: 18 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 160 | DRP1: 160 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 160x3,6/2,5x40 Z18 L,ES | m: 0.46 | nMax: 14400 | nMin: - | Weck: 30 | ||
| DA: 160 | IMD: 40 | SB1: 3.6 | IML: 2.5 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 18 | ZD1: 18 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 160 | DRP1: 160 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 160x3,6/2,5x40 Z18, R,ES | m: 0.46 | nMax: 14400 | nMin: - | Weck: 30 | ||
| DA: 100 | IMD: 32 | SB1: 3.2 | IML: 2.2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 20 | ZD1: - | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 100x3,2/2,2x32 Z20, L,ES | m: 0.18 | nMax: 18000 | nMin: - | Weck: 30 | ||
| DA: 100 | IMD: 32 | SB1: 3.2 | IML: 2.2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 20 | ZD1: 20 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 100x3,2/2,2x32 Z20, R,ES | m: 0.187 | nMax: 18000 | nMin: - | Weck: 30 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 100x2,6/2,0x32 Z=30, L,ES | m: 0.18 | nMax: 18000 | nMin: 18000 | Weck: 15 | ||
| DA: 100 | IMD: 32 | SB1: 2.6 | IML: 2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 100x2,6x32 Z=30, R,ES | m: 0.18 | nMax: 18000 | nMin: 18000 | Weck: 15 | ||
| DA: 150 | IMD: 22 | SB1: 3.5 | IML: 2.2 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 150x3,5/2,2x22 Z30, L,ES | m: - | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 150 | IMD: 22 | SB1: 3.5 | IML: 2.2 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: 30 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 150x3,5/2,2x22 Z30, R,ES | m: 0.38 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 150 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: 4/5,5/52 | ZK: Einseitig spitz links [ES-L] | Z: 44 | ZD1: 44 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 150x3,5x30 Z=44, L,ES | m: 0.39 | nMax: 15300 | nMin: - | Weck: 45 | ||
| DA: 150 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: 4/5,5/52 | ZK: Einseitig spitz rechts [ES-R] | Z: 44 | ZD1: 44 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 150 | DRP1: 150 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 150x3,5x30 Z=44, R,ES | m: 0.39 | nMax: 15300 | nMin: - | Weck: 45 | ||
| DA: 170 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: 4/5,5/52 | ZK: Einseitig spitz links [ES-L] | Z: 48 | ZD1: 48 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 170 | DRP1: 170 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 170x3,5x30 Z=48, L,ES | m: 0.46 | nMax: 13500 | nMin: - | Weck: 45 | ||
| DA: 170 | IMD: 30 | SB1: 3.5 | IML: 2.2 | NL: 4/5,5/52 | ZK: Einseitig spitz rechts [ES-R] | Z: 48 | ZD1: 48 | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 170 | DRP1: 170 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 170x3,5x30 Z=48, R,ES | m: 0.48 | nMax: 13500 | nMin: - | Weck: 45 | ||
| DA: 125 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: - | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 125 | DRP1: 125 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 125x2,6/x32 Z30 ES-L | m: 0.135 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 125 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: - | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 125 | DRP1: 125 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 125x2,6/x32 Z30 ES-R | m: 0.135 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 100 | IMD: 22 | SB1: 2.4 | IML: 1.6 | NL: 2/4/30 | ZK: Einseitig spitz rechts mit Achswinkel [ES-R_A] | Z: 30 | ZD1: 30 | IM: Bohrung [BO] | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: universal [UNI] | feedType: mechanischer Vorschub [MEC] | productDim: 100x2,4/1,6x22 Z30 ES-R | m: 0.090839962 | nMax: 18000 | nMin: - | Weck: 10 | ||
| DA: 100 | IMD: 22 | SB1: 2.4 | IML: 1.6 | NL: 2/4/30 | ZK: Einseitig spitz links mit Achswinkel [ES-L_A] | Z: 30 | ZD1: 30 | IM: Bohrung [BO] | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 100 | DRP1: 100 | DR1: universal [UNI] | feedType: mechanischer Vorschub [MEC] | productDim: 100x2,4/1,6x22 Z30 ES-L | m: 0.090839962 | nMax: 18000 | nMin: - | Weck: 10 | ||
| DA: 125 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz links [ES-L] | Z: 30 | ZD1: - | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 125 | DRP1: 125 | DR1: linksdrehend [LH] | feedType: universal [UNI] | productDim: 125x2,6/x32 Z30 ES-L | m: 0.139 | nMax: 15300 | nMin: - | Weck: 15 | ||
| DA: 125 | IMD: 32 | SB1: 2.6 | IML: 1.6 | NL: - | ZK: Einseitig spitz rechts [ES-R] | Z: 30 | ZD1: - | IM: - | CMS1: HL Board 06 [B06] | CUTMAT1: Hartmetall [HW] | Dmax: 125 | DRP1: 125 | DR1: rechtsdrehend [RH] | feedType: universal [UNI] | productDim: 125x2,6/x32 Z30 ES-R | m: 0.139 | nMax: 15300 | nMin: - | Weck: 15 |